Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. In our example photo, we put a chip and some jumper wires in the breadboard, but you can use anything with 0.1" spaced header.

Comes with one 18mm x 8mm x 8mm piece of solder-less breadboard.  There are two white posts on the bottom for PCB positioning. In our example we snapped those off and soldered two of them into our Perma-Proto.

USB Type 'A' Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable.

Specifications:

• Connector socket
• Connector type USB A
• Electrical mounting SMT
• Spatial orientation horizontal

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" perf boards but this is the most common pitch screw terminal.

Specifications:

• Connector type wire-board
• Connector socket
• Connector type male
• Number of pins 3
• Connector variant straight
• Contacts pitch 2mm
• Mounting THT
• Maximum current 1A
• Contact plating tinned
• Max. contact resistance: 20mΩ
• Operating temperature -25...85°C
• Flammability rating UL94V-0
• Max. operating voltage 100V
• Enclosure material polyamide
• Width 8.1mm

Specifications:

• Connector type wire-board
• Connector plug
• Connector type female
• Number of pins 2
• Connector variant w/o terminals
• Contacts pitch 1.5mm
• Connector series ZH
• Mounting on cable
• Rated voltage 50V
• Rated current 1A

These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than breadboard or female header type connections.

Terminals with 0.1" standard spacing. Inserts directly into perf and proto board. Comes in 2, 3, 4, 5, and 6 positions. Rated up to 150V @ 2A. Terminal can accept 26 to 20AWG wire.

This is a black colored 40 Pin 2.54 mm Single Row Pin Header Strip. These 0.1" (2.54mm) header strips are commonly used as low-cost Arduino connectors. The standard spacing allows use with solderless breadboards, perforated prototyping PCBs, and female headers. These header strips can easily be snapped into smaller strips to fit your application. These colored pin headers will help you label pin rails depending on their function.

Specifications:

Specifications:

• Connector Type : Female Header
• Pin Type : Straight
• Number of Pin : 40
• Number of Row : Single
• Pitch : 2.54mm
• Gender : Female

This Light sensor module based on photodetector GL5528 to detect the light intensity of the environment. As the resistance of the sensor varies depending on the amount of light it is exposed to, the output voltage changes with the ligth intensity.This module outputs both analog and digital signals, which can be used to trigger other modules.Also, the protentiometer can be used to adjust the sensitivety of digital output. The digital terminal output HIGH when the ligth intensity exceeds the value set by potentiometer, and vice versa.

IR Proximity Sensor

This IR Proximity Sensor is a multipurpose infrared sensor which can be used for obstacle sensing, color detection, fire detection, line sensing, etc and also as an encoder sensor. The sensor provides a digital output.