- Charge module- Linear charging
- Current- 1A adjustable
- Charge precision- 1.5%
- Input voltage- 4.5V-5.5V
- Full charge voltage- 4.2V
- Led indicator- red is charging blue is full charged
- Input interface- mini USB
- Work temperature- -10℃ to +85℃
- Inversed polarity- NO
- Size- small to 25X19X10mm
Note:
-
- Ampere meter can only be connected to 5v input end of the module
- It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough
- The connection wire should not be too thick
- Make sure the connect point is good
- If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage the chip.
code
TP4056
stock
2
category
Image
location