E5

Specifications:

• Diode type power LED
• Power 1W
• Shape lambertian
• LED version EMITER
• Colour temperature 2700-3050K
• LED colour white warm
• Luminosity 100-130lm
• Viewing angle 130°
• LED lens transparent
• Operating temperature -40...90°C
• Colour rendering index ≥77
• Forward voltage 3.3V
• LED current 350mA

Features
1. Use a dual-color LED that is capable of emitting light of two different colors, typically red and green, rather than only one color.
2. The LED is a common cathode one.
3. PCB size: 2.0 x 2.0 cm.
4. 3-Pin anti-reverse cable included.
5. Working voltage: 3-5V DC.

Features
1. A module with an auto-flash LED that can flash up to 7 colors.
2. No programming needed. Just connect it with power supply and it'll work.
3. 3-Pin anti-reverse cable included.
4. Working voltage: 5V.
5. PCB size: 2.0 x 2.0 cm.

Features
1. Use a plug-in full-color common-anode RGB LED.
2. A 330ohm current-limiting resistor is connected to each pin of the RGB to protect the LED from burning.
3. Adopt PWM technology to mix the three primary colors and obtain various colors.
4. Working voltage: 3.3-5V DC; PCB size: 2.0 x 2.0 cm.
5. 4-Pin anti-reverse cable included.

Description

This module outputs a red laser beam and can be pulsed by a microcontroller. The applications of this are limitless. You could use it to beam communications in morse code or UART to a remote sensor, or you could build a laser pointer robot to entertain your cat.

Technical Specs

• Supply Voltage: 3.0 – 5.5 V

Features

1) Use a laser that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation.
2) Laser wavelength: 650nm (red)
3) Beam mode: spot, continuous output
4) Working voltage: 3-5V DC; PCB size: 2.0 x 2.0 cm
5) Operating life cycle: > 1000h
6) Working current: < 25mA
7) Operating temperature: -36℃ ~ 65℃