Connectors

This simple board breaks out a USB Type-C connector's pins to a 0.1" pitch header. If you want to add the popular USB Type-C to your project, but don't want to put up with soldering the tiny connector, this is the board for you.

This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the popular micro-B USB to your project, but don't want to put up with soldering the tiny connector, this is the board for you.
 

eatures:

compact mechanical construction to ensure long term life

zero insertion and extraction pressure

gold plated contact to ensure low contact resistance and long operation life

ManufacturerMOLEX

Connectorcontact

Type of connectorwire-board

Kind of connectorfemale

Wire size28AWG

Connector seriesPicoBlade

Contact platingtinned

Contacts pitch1.25mm

Cable length0.304m

Connector variant:

• contacts on both sides of wire
• with lead

Additional information

• Gross weight: 0.46 g

βύσματα:: φύσα
τύπος σύνδεσης:: αγωγού – πλακέτας
είδος βυσμάτων:: θηλυκά
ράστερ επαφών:: 1.25mm
αριθμός ακίδων:: 4
έκδοση ακροδέκτη:: χωρίς επαφές
μηχανική συναρμολόγηση:: για αγωγό
τάση ονομαστική:: 125v
κατηγορία ευφλεκτότητας:: ul94v-0
τάση δοκιμής:: 500v
υλικό κορμού:: pbt
θερμοκρασία λειτουργίας:: -25…85°c
μονάδα οδηγού ακροδεκτών:: 1×4
κατασκευαστής:: joint tech

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

Specifications:

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!

The outer shell unscrews to reveal solder terminals on the inside of the plug. Solder on your wires and crimp the strain relief to make a finished, professional-looking cable.

Specifications:

USB Type 'A' Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable.

Specifications:

• Connector socket
• Connector type USB A
• Electrical mounting SMT
• Spatial orientation horizontal

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" perf boards but this is the most common pitch screw terminal.

Specifications:

• Connector type wire-board
• Connector socket
• Connector type male
• Number of pins 3
• Connector variant straight
• Contacts pitch 2mm
• Mounting THT
• Maximum current 1A
• Contact plating tinned
• Max. contact resistance: 20mΩ
• Operating temperature -25...85°C
• Flammability rating UL94V-0
• Max. operating voltage 100V
• Enclosure material polyamide
• Width 8.1mm