RGB Color Sensor with IR filter and White LED
Your electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately. The filter means you'll get much truer color than most sensors, since humans don't see IR.
Raspberry Pi Camera Module v2
The upgraded Raspberry Pi Camera Module v2 is the new official camera board released by the Raspberry Pi Foundation which connects to any Raspberry Pi or Compute Module. The Raspberry Pi Camera Module v2 is a high quality 8 megapixel camera based around the Sony IMX219 image sensor - allowing you to create HD video and still photographs. It is a custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.
LED Diffused 5mm Red, Green, Blue, Yellow, White
- Diode type LED
- LED diameter 5mm
- Luminosity 1120-1560mcd
- Viewing angle 30°
- Front convex
- LED lens diffused,
- LED current 20mA
- Operating voltage 2.9...3.6V
- Mounting THT
- Chromatic coordinates x: 0.27; y: 0.28
5MP Night Vision Raspberry Pi NoIR Camera Module – OV5647
5MP Night Vision Raspberry Pi NoIR Camera Module – OV5647 with Ribbon cable and dual IR LED modules
Description
The Raspberry Pi Camera Board plugs directly into the CSI connector on the Raspberry Pi. It’s able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps! Latest Version 1.3!
Light Sensor Module
This Light sensor module based on photodetector GL5528 to detect the light intensity of the environment. As the resistance of the sensor varies depending on the amount of light it is exposed to, the output voltage changes with the ligth intensity.This module outputs both analog and digital signals, which can be used to trigger other modules.Also, the protentiometer can be used to adjust the sensitivety of digital output. The digital terminal output HIGH when the ligth intensity exceeds the value set by potentiometer, and vice versa.
Photo Resistor LDR 5mm
This is a very small light sensor. A photocell changes resistance depending on the amount of light it is exposed to. These little sensors make great ambient light triggers (when light in the room turns on, do something).
Specifications:
- Light resistance : 10k Ohm
- Dark resistance : 20k Ohm
- Max voltage : 150V
- Max power: 100mW
Dimensions:
- 2 x 4 x 5mm
- 4mm between pins
- 31mm lead length
Photo-interrupter Module
Features
1. Support quick response; highly sensitive.
2. Provide a peak wavelength of 940nm.
3. With power light and signal output indicator and 3-pin anti-reverse cable.
4. PCB size: 2.0 x 2.0 cm.
5. Working voltage: 3.3-5V
Infrared-Receiver Module
Features
1. An infrared receiver module that uses a 1838b highly sensitive IR receiver.
2. Low cost, wide-angle, and long-distance receiving.
3. Output levels compatible with TTL and CMOS level, activated by low level.
4. With power light and indicator of digital signal output.
5. Working voltage: 3-5V DC; PCB size: 2.0 x 2.0 cm.
Photoresistor Sensor Module
Features
1. A photoresistor module of which the resistance decreases with increasing incident light intensity.
2. Sensitive to ambient light conditions; so it is generally used to detect the light intensity in the surroundings, trigger MCU or relay module, etc.
3. Use a highly-sensitive photoresistor sensor.
4. With power light; a 3-pin anti-reverse cable included.
5. Working voltage: 3.3-5VDC; PCB size: 2.0 x 2.0 cm.