Components

βύσματα:: φύσα
τύπος σύνδεσης:: αγωγού – πλακέτας
είδος βυσμάτων:: θηλυκά
ράστερ επαφών:: 1.25mm
αριθμός ακίδων:: 4
έκδοση ακροδέκτη:: χωρίς επαφές
μηχανική συναρμολόγηση:: για αγωγό
τάση ονομαστική:: 125v
κατηγορία ευφλεκτότητας:: ul94v-0
τάση δοκιμής:: 500v
υλικό κορμού:: pbt
θερμοκρασία λειτουργίας:: -25…85°c
μονάδα οδηγού ακροδεκτών:: 1×4
κατασκευαστής:: joint tech

This little remote control would be handy for controlling a robot or other project from across the room. It has 21 buttons and a layout we thought was handy: directional buttons and number entry buttons.

Specifications:

• Mini remote control with 21 buttons
• 38KHz NEC code output, 940nm IR LED
• 40mm x 86mm x 7mm (3.4" x 1.6" x 0.3")
• Runs on CR2025 battery, included

This is about 1080 feet (330m) of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large enough quantity to not be afraid of making a few mistakes. 

Specifications:

• Connector plug
• Connector type 4mm banana
• Rated current 32A
• Overall length 56mm
• Contact plating nickel plated
• Connection soldering
• Mounting on cable
• Conform to the norm EN61010 600V CAT II
• Insulator material polyamide
• Material brass

Connector variant:

• insulated
• with 4 mm axial socket

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

Specifications:

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!

The outer shell unscrews to reveal solder terminals on the inside of the plug. Solder on your wires and crimp the strain relief to make a finished, professional-looking cable.

Specifications:

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing.

• 1x Male
• 1x Female

These high quality jumper cables are useful for creating cirtuits between your microcontroller and the breadboard. Both of the terminals are female and fit to all pin headers. The flexible, durable and reusable jumper wires are easy to trace, easy to connect and disconnect. They are useful and convenient for electronic DIY. Multiple jumpers can be installed next to one another on a 0.1" header.

Comes in a bag of 10 pieces in a variety of colors.

These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively, no screwing anything into place. These LED holders accept a 10mm LED and mount into an 35/64" diameter hole.

Specifications:

• LED diameter 10mm
• Material plastic
• LED holder type convex
• Panel cutout diameter 14mm

How do you keep a panel-mounted toggle switch safe in all-weather conditions? Well, you use protection of course! This waterproof switch cap threads onto the toggle switch and allows you to operate the switch without exposing the switch itself to weather, high-humidity and other environmental hazards. The M12X0.75 thread fits most panel mount toggle switch bodies.

Dimensions: 20.4mm diameter, 23.8mm total length